It’s no secret that parquet, laminate, ceramic tiles pass noise and various blows through themselves. Blows appear due to the fall, of any object on the floor. In order to avoid such situations, you need to carry out good sound insulation for the flooring. You need to close all the cracks in the floor and proceed to the process. Often the cracks are located at the joints and along the edges of the room. To fill these cracks, you can use mineral wool.
Before laying soundproofing, the floor must be prepared, it should be dry, clean and even. If necessary, self -leveling solutions are used, fixing the primer on top.
Then wooden lags are laid on the floor, under them you need a technical cork in advance, it will play the role of the gasket. Mineral slabs are laid in the voids with a thickness of at least 5cm.
Lay the sheets of chipboard on top, screwing them with self -tapping screws. The basis is considered ready. You can lay the floor covering on top, the sound will not go through.
There is another way of soundproofing, using noise -protective plates. In this method, it is advisable to use thermal insulation slabs.
After the end of the sound – and thermal insulation make the floating base for the flooring, at least 5cm thick. To prevent sound passing, you can put a soft flooring, such as carpet.