Practical and perfectly looking material for wall decoration and floor is ceramic tiles. It is good for everyone, except that it often needs to be cut to cover some small remains of the base area. Cutting must be performed competently. Only then the tile will remain in integrity. It is worth noting that now in the production of ceramic tiles they use a high -performance solution of high -performance.
To cut the tiles, you can use one of several fairly common tools. In particular, they most often use a conventional roller glass cutter or a more suitable tile for these purposes. To cut floor tiles, a special tool is used – cafeller.
Cutting tiles should start by soaking the finishing material itself in water for an hour. After that, an accurate measurement should be carried out, after which a line is applied to the tile, along which cutting will be carried out. This can be done both with the help of a nail and an ordinary marker.
Next, the tile is laid on a flat surface. With the help of glass cutter or other similar tool, an incision is scratched in line, which should pass through the glazed covered. After the tile, it simply takes over the edges and hit a wooden bar or the edge has become so that it breaks along the cut line.