To date, a very popular service for the manufacture of perfectly even openings and holes in concrete, reinforced concrete, brick structures is diamond drilling and cutting. The diameter of the holes can vary from 42 to600 mm, and the depth is reached 6-8 meters. Such holes are made using a diamond installation and pump for supplying water for cooling diamond segments. The process of diamond drilling is almost silent and unstressed. The small size of the drilling installation allow you to perform holes in hard -to -reach places, under the risers of sewage and heating, ventilation ducts.
Type of diamond cutting, of four existing ones, is selected depending on the task. The easiest look is cutting using a manual cutter. It is used to perform openings in residential buildings in walls up to 25 cm thick. A stena -cutting machine is used on construction sites to dismantle walls and cut opening in walls up to 80 cm thick. This type of diamond cutting, such as cutting with a whip, is used to dismantle the ceilings and perform openings in the ceilings for the torplator, escalator. Cable cutting is used for difficult dismantling on land and under water, for example, to dismantle bridges.