We need an even base, we will assume that we already have it. First we lay the shock -absorbing substrate, it will relieve small particles of the base in the seams and creaks. The laminate is laid perpendicular to the window or diagonally and the styling from the left wall begins relative to the window. We lay the first row, retreating from the wall approximately a centimeter, it will be a deformation seam. We cut the last board in size also leaving a centimeter from the wall. The next row begins with a cut piece, this is done for a bundle of seams. And you knew that now a trimming board is the price of which is very high, used only in private houses.
And so each row begins with the pruning of the previous. It is necessary to monitor the rows do not distort, otherwise the gaps in the seams may remain. Do not forget to leave one centimeter from the wall, if this is not done, then over time from changes in humidity and temperature, the entire floor can swell. It is recommended to cut the laminate with an electric jigsaw with the canvas where the teeth are directed down this is necessary so that there are no chips on the sawn edges. Before laying the laminate in a certain room, he needs to lie there at least 24 hours, so that he is used to the microclimate and does not further deform. Before laying, read the manufacturer’s instructions.