The installation of doors should be approached responsibly, since it can be damaged during installation. Do not forget about it. The door can be bought at a construction store, and you can also make an individual order. It is necessary to start installing with the installation of the door frame, namely, cut the platbands strictly at an angle of 45 degrees. A hacksaw and knock will help you with this. But not everything is so simple, because it will take a trim of the door leaf and the box for the loops. Only professionals will be able to do this work qualitatively. If you bought a door in a construction store, then there will be no problems with this. After installing the door, do not forget to visit the site
When installing interior doors, you can make a lot of errors. One of these is the wrong measurement under the door leaf. Such an error will not meet with the correct execution of this process, t. e. As a result, there will be a gap between the box and the door itself. Such a gap is recommended to make 3-5 mm. from each side. It still depends on the time of the year installation of the door. Since the door swells in the summer, the gap should not be made large, but in the winter on the contrary. Also, interior doors must definitely adapt to the humidity of the apartment within a few days.