You can insulate the floors in different ways. The simplest is linoleum laying with sound – and thermal insulation. You can also send two layers of wood-fibrous slabs, and then lay parquet, linoleum or tiles on top. And also the system of cable worming of the floors is used. First of all, you need to decompose the heat -insulating base on the floor surface. A foil is laid out on top of this layer, which will subsequently reflect heat flows. Now the foil should carefully lay out the heating cable. In order to fix it, pour the floor with concrete. A concrete coating layer should be at least five centimeters. And already on concrete you can put ceramic floor tiles or other coating.
The heating cable must be connected to the temperature thermostat. This will save your electricity.
Warm floor creates the most comfortable heat regime for humans. Moreover, the air in the room does not overheat, but remains fresh. However, such a system can break: the thermostat has failed, the heating cable has broken. In case of damage to the cable, a special device determines the place of malfunction, there they remove a couple of tiles and the cable itself is repaired. If the heat controller is broken, then it is either changed or repaired.