In any repair work, the preparation of walls is important. Since if the walls are uneven, then not only it will be impossible to qualitatively glue the wallpaper, but also properly arrange the furniture. Any preparatory work begins with the fact that the old wallpaper is removed and the old putty.
The old putty is removed with a width of flexible metal with a width of flexible width. After the old wallpaper is removed and the putty goes to the putty of the walls. At more even corners, it is necessary to apply a thinner layer of putty. You need to use putty on a synthetic basis, which will protect the old putty from cracking. Despite the fact that they use the finished putty, much also depends on the quality of work. For puttying the gypsum base, it is necessary to fluid the putty quite liquidly.
Putty brick and concrete walls, you need to use a wide spatula. To obtain the maximum even as possible wall, after applying the first layer of putty, wait 7 minutes and re -pass by a spatula. This will allow you to get a flat and smooth surface. It is possible to achieve the maximum smooth surface if you treat the surface with sandpaper. But this is permissible only for processing a flat surface.