The ceiling is one of the most important parts of the room. And if there are any defects on the ceiling, then it will immediately catch your eye. You won’t make it something and you won’t hang it with a picture, everything is in sight. Therefore, the repair of the ceiling should be treated meticulously and carefully. It is very important not to rush when repairing the ceiling and not saving in preliminary work. Otherwise, invested funds will be wasted.
So, let’s begin. All swollen and poorly held parts must be cleaned or discouraged. If the ceiling was whitewashed, it is necessary to remove the entire whitewash from the ceiling. The most practical option is to tear off the whitewashing with a spatula, producing its surface prematurely. If there was painting, it means to clean the remains of paint.
If there were wallpaper, then it is necessary to remove their remains. If a large seizure has formed between the floor slabs during the cleaning, it can be blown by mounting foam. It is necessary to carefully cut it with a knife in a level with a ceiling and putting it on. If there were moldy places, then they need to be treated with fungicidal (anti -fleshy or antifungal) soils. Then it is necessary to primer the ceiling with a deep impregnation with a deep impregnation. Next, tackle all cracks and irregularities with putty, if necessary, you can use a reinforcing plastic grid. Sprinkle the entire ceiling. After the ceiling was soldered, it must be primed again. Now the ceiling is ready for further finishing work, such as gluing ceiling plates, painting water -based paint, applying liquid wallpaper.