Previously, it is necessary to make a sketch of the future ceiling, for example: “Window to the sky”. Then, in the center of the ceiling, marking the “fake” window is made. An aluminum profile is attached throughout the perimeter of this window using self -tapping screws. The same profile is set the boundary of the ceiling and walls. The next stage is the connection of these guides with transverse profiles. Now many people are installing plastic windows,
They are installed at a distance of 50-60 cm. It is necessary to outline the location of the lamps in advance so that there is no profile in this place. Make wiring for the required number of lighting points. Now they begin directly to the installation of elements cut out of drywall, to the prepared frame. They make holes for the location of vertical lamps. In a metal profile, which is fixed in terms of the future “windows” make the same holes. With the help of narrow drywall strips, “window” slopes are made out. If desired, you can install horizontal lighting in them. All seams are sealed with sickle. After drying it is smoothed out. Then the entire structure and the base surface are putty. Then finally aligned with a special grater. The surface is covered with paint. “Window” is sealed with wallpaper with a star pattern that glows in the dark. Install fixtures. The junction of the ceiling and walls is covered with a border.