After the preparation of the floors, the wall frame is erected. Begin with attachment to the floor of horizontal profiles with dowels and screws. In places where the profiles are connected to the floor, walls and ceilings, pieces of insulating tape from polyurethane film are laid.
Looking for a good site on which inexpensive window systems are sold? You can visit the site
Plasterboard sheets are mounted vertically on a metal frame, from ceiling to floor. Start to sheature from the corner of the frame. Sheets place each other near each other.
When lining, it is necessary to constantly monitor the level of irregularities of the wall. To do this, check the deviations between the lowest place and the highest. The difference should not exceed 4 mm, in the height of the wall no more than6 mm.
Using cut profiles, you can build walls of curved curved shape. Permissible curvature in a radius of at least500 mm. When installing curved internal walls, plasterboard sheets are also used.
Horizontal profiles are fixed with screws and dowels at the selected distance from the wall. Mounted on the ceiling and floor. After insert vertical profiles, according to the existing horizontal. The final stages is putty of hats of dowels and screws.
Gypsum cardboard is suitable for facing many building materials: brick, wood and other types. It helps to align the walls. Performs the functions of sound and thermal insulation.