Any tile will go well on drywall, and also hold on it will also be good. And many experts use the following technologies: – First, the usual glue for tiles is taken, which is made on a tile -based basis, it will glue the tile well.
You can also use elastic tile glue, it can be either in the finished solution and in a dry state. And this option is the most optimal and reliable.
Also, many use liquid nails for tiles, but this will not help save.
Any glue should be chosen taking into account the humidity of the room. Before you start facing the walls with tiles, you need:
– Plasterboard sheets should be darkened, this is necessary for the stability of the structure, and it is better to use putty for joints.
– After that, the surface must be primed, and the primer should be chosen after the desired glue is selected for tiles.
Before the glue is applied, it is worth putting the guides differently can be stood in drywall, this applies if the sheets are thinner than 12 millimeters. But the installation of guides as often as possible, then they will help not to leave the sheets.