The technology of wrapping wallpaper should be well known to any owner of the home, since this procedure is quite complicated and requires some specific actions. In order to ensure a high result of the work, you must first prepare the walls for this material qualitatively. This procedure is not easy.
First, the material with which the finish was previously carried out was removed. Next move to the removal of cracks available on the wall. You can make it with a gypsum solution. When it dries, a layer of plaster or putty should be applied to the wall to remove irregularities. Recently, heating convectors are very popular to choose them wisely so that they have served for a long time.
Next, the right amount of material panels is prepared. When this is done, glue is applied to the walls and the finishing coating itself. Then the first canvas begin to be attached to one of the corners. Any curtains that occur are removed, and air bubbles are completely released from under the canvas.
Depending on what density the wallpaper has, the option of their placement on the wall is selected. For example, in the case of paper canvases should be overlapped. Denser non -woven ones must be glued to the water. By the way, in the case of the latter, glue should be applied only to the surface of the wall.