To install doors in the bath, you need to equip the grooves in the doorway. They should be 5-10 mm more than the width of the box so that if necessary, the door location can be corrected. When installing the box, you need to pay attention where exactly the door will open up so as not to confuse its position.
A horizontal beam, which is propagated using vertical racks, is being made in the opening. The threshold is laid on the lower part of the doorway, it should not be too high so as not to complicate movement. The vertical location of the box is checked by the level. The door should be placed strictly vertically, after which its position is fixed with wedges, which are driven between the wall and the box. The door is fixed with dowels for which you need to prepare holes in advance.
After reliable fixing the box, you can install the door leaf. If the canvas is heavy, then the uneven location of the loops is used. The first loop is attached at a distance of 20-25 cm from the door of the door, the second is at an altitude of 40-50 cm, and when placing a third loop from the lower edge, 20-25 cm must be retreated. This arrangement will protect the structure from a possible skew.
After hanging the door leaf, a felt roller must be filled around the perimeter of the box. All the cracks that were formed between the box and the wall are also embedded.