Many people who independently engage in the installation of the door ignore the value of the correct installation of the door box. As a result, then they pay many problems (poor closing, opening of the door). There are designs in which defects are easily eliminated, but there are also structures in which it is almost impossible to eliminate the disadvantages, and it will be necessary to completely remove the door frame.
Metal entrance doors are very popular now. It is worth noting that the finish of the metal door causes difficulties among the non -specialists. Therefore, if you want to finish the metal door, then we advise you to contact professionals.
Disadvantages can be eliminated using minor repairs, if they are insignificant. The correctly installed frame should be all angles 90º. The upper part should be parallel to the lower part. Both hinges must correspond to the level and plumb line. If the door frame is installed incorrectly, then it will have one corner more than 90 º, and the other is less than 90 º. Holes are created between the door rakes, if they are incorrectly compiled with each other. This problem can be solved by relaxation or compression of the anchor in one or more jambs. If fixing screws were installed before this manipulation, then they will need to be pulled after. The compression of the anchor must be adjusted so that the jambs do not move. It is important to check whether the hinge is attached correctly.