The great basis for the parquet board is plywood. It usually has a smooth and even surface. In fact, the parquet board is also a kind of plywood type. Only it is processed by a specific method and can be attached to concrete with a plastic dowel with a self -tapping screw.
To lay a parquet board on a plywood base, you will definitely need the following tools: a compressor, a vacuum cleaner, a carpentry manual tool, as well as extension cords, spatulas and a carpentry electric tool. As for the necessary material, you can choose plywood sheets of the most suitable size. To obtain even squares, they will have to be cut into 4 parts.
If you have a large number of sheets, you should use a hard conductor to cut them for styling. For marking, you need to apply a template directly to the lower sheet. The places of the holes are planned by the drill. After that, the template is usually removed and the holes are completely drilled. In the presence of certain skills at a time, you can easily drill several sheets.
After harvesting excess garbage, you should only have a plywood stack. The prepared composition should be applied to the base with a special roller. You may also need to apply an additional layer. The plywood is recommended to lay out very carefully so that the maximum flat surface is obtained. Just remodel such a job will certainly not work. After laying the first row, you must immediately move on to the second. Put the styling promptly.