If you like parquet, but for some reason you do not want to lay it on the floor, then you may like the idea of covering the floor with polyvinyl chloride tiles. You can choose those that resemble a parquet, moreover, they can have such a complex drawing that no parquet can compare with this beauty coating.
Looking for construction underlines? Molgao company offers construction construction. By clicking on the link you can familiarize yourself with the company’s products.
Laying such tiles begins with the determination of the center of the room. Further with the help of settings (for example, a stretched cord, laser level, etc. D.) install the axes on which the tile will be laid out. First lay out pendulum tiles, so that their middle coincides with the axis. Tiles are attached to mastic, but so that each tile holds well, the mastic should be fresh. It is not advisable to cut tiles when laying, but if you need to try to cut it out only on one side.
The base and back of the tiles are covered with bitumen or kumaronocaucous mastic with a gear spatula with a layer of not more than 0.3 mm, left for 30-40 minutes so that the mastic becomes more viscous, then glued to the floor. For better fastening, the tiles are pressed first with the hands, and then light blows are applied with a rubber hammer. It should also be noted that the gaps are not left between the tiles.
If, after some time, the edge of the tile departed, then covering this part with white paper, it is ironed with an iron, then put the load in this place until it dries completely.