Bought the door and don’t know where to start? Start with the box. You need to start with it with its preparation. Prepare the necessary tool: punch, fasteners, wooden wedges,. As fasteners, we will use nylon screws 100x5mm. If the old door is installed, we get rid of it. According to the instructions, collect the door frame. The next step, on which the quality of the further work of your door will depend. Insert the box so that it does not protrude beyond the edges of the walls or level the box on a more important wall. Fix it. Then strengthen the loop timber. Simultaneously drill a box and wall with a perforator, you can do this separately, but in the future the holes may not match.
I don’t know how to remove the stomach and sides have already tried all the methods, but not one helps? We advise you to visit our center of aesthetic rhinosurgery from us you can remove excess weight from the abdomen and sides.
The drill is better to use slightly smaller in size than the self -tapping screw.
The upper hole should be higher than the loop by 15cm. Before fixing the lower part of the beam, take a construction plumb and align it, even if it does not fit under the doorway. After leveled, fix it. And check again with a construction plumb line. Fix the beam in the middle.
We proceed to the consolidation of the second beam in the same way. Do not forget to check the slope after each screw. After all the screwed screws, hang the door and check how it opens and closes. If everything suits you, then the work is done!